Waterproofing Series
Waterproofing Series
Waterproofing Solutions for New and Old Construction
Deep penetration into concrete pores | Flexible membranes that bridge hairline cracks | UV resistant coatings for terrace protection
BS NANO BOND+
Area Of Application
BS NANO BOND+ IS READY TO USE SINGLE COMPACT SILICONE BASED INVISIBLE COATING AND BEST QUALITY WATER REPELLENT. ROOF, SLAB AREA, BALCONY, VERTICAL WALLS, BRICK, EXPOSED WORK AND WATERBODY AREA.
How to Use
APPLIED SURFACE MUST BE CLEAN AND FREE FROM DUST, OIL, GREASE AND LOOSE PRACTICAL.
ALL CRACKS AND HOLES MUST BE REPAIR BEFORE APPLICATION.
APPLIED SURFACE MUST BE PRE WETTED BY WATER ALLOW IT FOR TOUCH DRY.
APPLY 1ST COAT BY BRUSH OR SPRAY AND ALLOW IT DRY FOR 3-4 HOUR AND THEN APPLY SECOND.
BS SBR 50
Repair RCC beam, column, slab & other waterproofing on new terrace, bathroom, balcony, chajja, sloping roof etc.
Area Of Application
SBR LATEX FOR INTERNAL REPAIRS & WATERPROOFING CHEMICAL IS SPECIALLY MADE STYRENE BUTADIENE CO-POLYMER LATEX LIQUID USE FOR WATERPROOFING AND REPAIRING OF CONCRETE AND PLASTER, AS BONDING PERFORMANCE PLASTER.
Benefits
USE FOR WATERPROOFING COAT
PREVENT CRACKING
HIGH STRENGTH WITH OLD & NEW CONCRETE
MULTIPURPOSE USE
BS WATERBLOCK B-2
Area Of Application
BS WATERBLOCK B-2 IS TWO COMPONENT HIGHLY ACRYLIC POLYMER HIGH PERFORMANCE WATERPROOFING COATING FOR WET AREAS. ITS ALSO COVER SMALL CRACK AND GIVE EXCELLENT WATERPROOFING.
Benefits
HIGHLY WATERPROOFING MATERIL
READY TO MIX
EXCELLENT BONDING WITH CONCRETE & MASONRY SURFACE
ELASTROMATIC COAT
CRACK BRIDGING ABILITY
BS BOND COAT
Area Of Application
BS BOND COAT IS AN AROMATIC FLEXIBLE SINGLE PACK WATERPROOFING MEMBRANE MATERIAL MADE FROM PURE ACRYLIC POLYMER FOR WATERPROOFING COATING ON TERRACE AND EXTERNAL WALL . IS THICK MEMBRANE PROVIDE EXCELLENT CRACK BRIDGING ABILITY AND ULTIMATE WATERPROOFING ON TILES AND CHINA MOSAIC.
Benefits
READY TO USE MATERIAL
HIGHLY WATERPROOFING MATERIAL
ITS WASHBLE & SCRUB RESISTANT
ANTI CARBONATION PROPERTIES
WEATHER AND UV RESISTANCE
CRACK BRIDGING ABILITY
BEING ELASTIC IN NATURE IT ALLOW MINOR STRUCTURAL MOVEMENT
BS CRACK-FX PASTE
Area Of Application
BOND SURE CRACK-FX PASTE READY TO USE ACYLIC BASE CRACK FILLING MATERIAL. SINGLE COMPOUND FOR BOTH SIDE INTERIOR AND EXTERIOR SURFACE ITS ENSURES UNMATCHED CRACK ABILITY FORPLASTER CRACKS OF UPTO 5MM.
Benefits
-
READY TO USE
WATER RESISTANT LAYER
EASILY OVER COATED BY EMULSION PAINT
SETTING TIME 3 HOUR ANY SURFACE BONDING (PLASTER , POP JOINT OF WINDOW)
